Request a Quote Request a Call

IWC PTFE Lightweight Wall Heat Shrinkable Tubing 2:1 - Fractional

PTFE Lightweight Wall Heat Shrinkable Tubing 2:1 - Fractional

IWC PTFE Lightweight Wall Heat Shrinkable Tubing 2:1 - Fractional

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

This picture is representative only and may not match the specific configuration of the product listed on this page. Please refer to the product specifications for more information on this part number and its exact configuration.

HS2TFL1/8

SKU: HS2TFL1/8
Manufacturer: IWC Approved
Cable Type: Enclosures
Military Specification: AMS-DTL-23053/12 Class 4
Mechanical Characteristics - Shrink Temperature: 662°F / 350°C
Mechanical Characteristics - Continuous Use Temperature: -100° to 500°F / -75° to 260°C
Weight: 0.0000
Insulation Material: PTFE (Lightweight Wall) - Polytetrafluoroethylene
Amount: 4 ft and coils
Physical Characteristics - Color: Natural - Translucent to Opaque White
Min. Expanded I.D.: .215
Recovered Wall Thickness: .008 ± .002
Max. Recovered I.D.: .130
Fractional Size: 1/8
Add to Compare

HS2TFL1/4

SKU: HS2TFL1/4
Manufacturer: IWC Approved
Cable Type: Enclosures
Military Specification: AMS-DTL-23053/12 Class 4
Mechanical Characteristics - Shrink Temperature: 662°F / 350°C
Mechanical Characteristics - Continuous Use Temperature: -100° to 500°F / -75° to 260°C
Weight: 0.0000
Insulation Material: PTFE (Lightweight Wall) - Polytetrafluoroethylene
Amount: 4 ft and coils
Physical Characteristics - Color: Natural - Translucent to Opaque White
Min. Expanded I.D.: .410
Recovered Wall Thickness: .010 ± .003
Max. Recovered I.D.: .260
Fractional Size: 1/4
Add to Compare

HS2TFL5/16

SKU: HS2TFL5/16
Manufacturer: IWC Approved
Cable Type: Enclosures
Military Specification: AMS-DTL-23053/12 Class 4
Mechanical Characteristics - Shrink Temperature: 662°F / 350°C
Mechanical Characteristics - Continuous Use Temperature: -100° to 500°F / -75° to 260°C
Weight: 0.0000
Insulation Material: PTFE (Lightweight Wall) - Polytetrafluoroethylene
Amount: 4 ft and coils
Physical Characteristics - Color: Natural - Translucent to Opaque White
Min. Expanded I.D.: .470
Recovered Wall Thickness: .012 ± .003
Max. Recovered I.D.: .329
Fractional Size: 5/16
Add to Compare

* Required Fields

$0.0000
 

Quick Overview

PTFE heat shrinkable tubing is a high quality tube that has been expanded mechanically to slide over a part. It is then heated to shrink down to a tight fit that will not fall off. PTFE heat shrink tubing is the most difficult of the three fluoroplastic materials to shrink because of the extreme shrink temperature (662°F/350°C for 10 minutes). The most reliable way to shrink PTFE is in a controlled temperature oven. You can use a heat gun or welding torch but it is very difficult to use these methods because they have the tendency to overheat the material in one area while the remainder of the material is too cool to shrink. Supplied in natural unless otherwise specified.
SKUMin. Expanded I.D.Recovered Wall ThicknessMax. Recovered I.D.Fractional Size
HS2TFL5/16.470.012 ± .003.3295/16
HS2TFL1/4.410.010 ± .003.2601/4
HS2TFL1/8.215.008 ± .002.1301/8
PTFE, 2:1 Shrink Ratio.

Specifications

SKU PTFE Lightweight Wall Heat Shrinkable Tubing 2:1 - Fractional
Manufacturer IWC Approved
Military Specification AMS-DTL-23053/12 Class 4